We,
GOGOGO Mechanical&Electrical Co.,Ltd specialize in high quality energy-efficient electric motors. The combination of the best available materials, high quality sheet metal and the right amount of copper in the rotor/stator makes GOGOGO's electric motors highly energy-efficient.
We design our electric motors to fit and match our customer's requirements at our production site. The electric motors can be supplemented with a range of options and accessories or modified with a special design to endure any environment.
Electric motors account for a large part of the electricity used. If we look at the world, electric motors account for about 65 percent of the electricity used in industry. To reduce this use of electricity, there are legal requirements regarding the efficiency of electric motors manufactured in the EU, or exported into the EU.
Three-phase, single-speed asynchronous motors are covered by the requirements today. Asynchronous motors are the most common type of motor and account for 90 percent of the electricity consumption of all electric motors in the power range 0.75 - 375 kW.
According to that standard, the energy efficiency classes have the designations IE1, IE2, IE3 and IE4, where IE4 has the highest efficiency.
IE2 Series Cast Iron Three Phase Induction Motor is specially designed for European market, whose terminal box is located on the top of motor.They are totally enclosed and fan-cooling designed. They are newly designed in conformity with the relevant requirements / rules of IEC standards.
For the Connection Model of 2p 4p 6p 8p Y2 motor, please refer to the Name Plate on the motor (The Y Connection is adopted by motors' Output equal or below 3kW; The Delta-Connection is adopted by motors' Output above 4kW).
| Power: |
0.55kw-315kw |
Voltage: |
380/415/440V( can can done as your need) |
| Frequency: |
50/60hz |
Enamelled Wire: |
Copper Wire (Can Done Aluminum wire as Your Need) |
| Insulation Class: |
F |
Mounting Way: |
B3 Foot /B5 Flange /B35 Foot and Flange |
| Protection Grade: |
IP55 |
motor body : |
cast iron body of ac motor |
> Applications
General place and machine without special requirments, for example: machine tools, pumps, fans, transport machinery, mixer, agriculture machinery, food machines, agitator, air compressor etc. We also can supply aluminum housing type for frame size under the standard of IEC.
> Our Electric Motor Advantages
1. Great quality of materials(Cold silicon steel/100% copper wire/ Aluminum frame)
2.Colorful wiring
3.Clear nameplate
4.Reliable package
5.High efficiency, low noise
6.Best materials make best performance
YC 132m-2 5.5kw 7.5HP 110/220V Single Phase Electric Motor
1.YC asynchronous motor is a kind of low-voltage 1-phase cage induction electric motor, which is a basic series for general uses with frame range 80-132 and it's a new product with the national unified design.
2.High efficiency, energy saving, fine operation performance, small vibration, low noise, long service life, high reliability, convenient maintenance, big breakaway torque are all it's strengths.
3. Fixing measurement and power grade completely conform to IEC standard. It employs Grade F insulation, IP54 or IP55 class for shell protection and IC411 cooling mode.
| Power: |
0.37kw-7.5kw |
Voltage: |
220/230V 240V 110V 115V |
| Frequency: |
50/60hz |
Enamelled Wire: |
Copper Wire (Can Done Aluminum wire as Your Need) |
| Insulation Class: |
F |
Mounting Way: |
B3 Foot |
| Protection Grade: |
IP44 IP54 |
motor body : |
cast iron body of ac motor |
Exemptions from the current directive
- Operation other than S1 (continuous drive) or S3 (intermittent drive) with a nominal cyclicity factor of 80 percent or lower.
- Made for assembly with frequency inverters (integral motors).
- Electric motors made for use in liquid.
- Electric motors that are fully integrated into a product (e.g. a gear, pump, fan or compressor) where the energy performance is not tested independently of the product.
- Brake motors
Electric motors intended for operation exclusively:
- At altitudes exceeding 4 000 meters above sea level.
- If ambient air temperatures exceed 60°C.
- Where maximum operating temperature exceeds 400°C.
- Where ambient air temperatures are less than -30°C for all motors, or less than 0°C for motors with water cooling.
- In explosive atmospheres (as defined in Directive 94/9 / EC 9)
The requirements do not apply to ships or other means of transport that carry goods or persons, since there must be specially designed engines for this purpose. (If the same mobile conveyor belt is used on ships as well as on land, the rules apply).
Also, the requirements do not apply to repair of motors previously placed on the market, or put into service - unless the repair is so extensive that the product will in practice be brand new.
If the motor is to be further exported for use outside Europe, the requirements do not apply.
Some other requirements apply to water-cooled motors
We have our own design and development team, we can provide customers with standard AC electric motors, We can also customize the single phase/three phase motors according to the special needs of customers. Currently our main motor products cover three - phase high - efficiency motors,general three - phase motors, single phase motors, etc.
The main motor ranges: IE3 / YE3, IE2 / YE2, IE1 / Y2, Y, YS, MS, YC, YL, YY, MC, MY, ML motors.
American standard NEMA motors
Russian standard GOST ANP motors
Taiwan type AEEF motors,YC motors
Why choose us?
Guarantee of our motors:18-24months
General elivery time:15-30days
Price of motors: Most reasonable during your all suppliers
Packing:Strong export cartons/wooden case/plywood cases/pallets
Payment way with your order: T/T,LC,DP,etc
Sample order: Acceptable
Shipment way: Sea ship,Air flight,Express way,Land transfer way.
If you are looking for new better supplier or purchase electric motors, please feel free contact us now.You will get all what you want.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}